4512581

SKU: 4512581
Brand:
Qty: 3
Price:
54,00 €
Qty.: - +
   - or -   
Heatit Z-Push Button 8 is a battery operated wall switch with 8 push buttons. The switch enables you to control the Z-Wave-products in your smart home system. Managing your Z-Wave products becomes easy and practical. The switch can be set up to control scenarios or work in associations with other Z-Wave products.


Heatit Z-Push Button 8 can control up to 4 seperate association groups with up to 20 products or up to 16 scenarios through your gateway.

Heatit Z-Push Button 8 may not be used as a stand-alone unit; it must be included in a gateway to function.

The switch fits into standard Elko, Schneider Exxact and Gira System 55 frames.

The switch is easy to installed, and may be fastened with screws or double-sided tape.

FUNCTIONS

  • Battery operated wall switch
  • Fits Gira System 55, Elko RS-16 and Schneider Exxact
  • Controls 4 separate groups and up to 20 units
  • Controls up to 16 scenarios via your gateway
  • LED-diode
  • Easy to install with screws or double-sided tape
  • Supports encryption modes S0, S2 Authenticated Class,
    S2 Unauthenticated Class

TECHNICAL DATA

Protocol Z-Wave, 868,4 MHz
SDK 6.71.01
Power 1 x CR2450 battery
Buttons 8
Operating temperature 0 – 40°C
Relative humidity 8% – 80%
Range Up to 20 meters (depending on surroundings)
IP class IP 20
Size (LxWxH) 71,2 x 71,2 x 13,6 mm
Explorer Frame Support Yes
Device Type Wall controller
Generic Device Class Switch Remote
Specific Device Class Switch Remote Multilevel
Routing No
Flirs No
Approvals CE, RoHS 2011/65/EU

 
Similar products
Product Overview:
Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch
boxes, or anywhere else where it is necessary to operate an electric device up to 10A. Fibaro
On/Off Relay Switch can switch on or off connected device either through radio waves or
through the wall switch connected directly to it.
SKU: FGS-212 ,   Qty: 28
59,99 €
The remotely operated FIBARO Single Switch 2 is designed to turn electrical devices on and off and to measure their power and energy consumption. The compact size of the device makes it the world's smallest of its type and allows for the product to be ins
SKU: FGS-213 ,   Qty: 23
59,99 €
SWIID SwiidInter Z-Wave ripplülitiga, valge
SKU: SW-ZCS-1-WH ,   Qty: Tellimisel
64,90 €
The HELTUN 5 channels wall touch panel switch replaces an existing in-wall switch and enables manual or remote switch (On/Off) control
SKU: HE2114012 ,   Qty: 1
129,99 €
Heatit Z-Push Button 2 is a battery operated wall switch with 2 push buttons. The switch enables you to control the Z-Wave-products in your smart home system. Managing your Z-Wave products becomes easy and practical. The switch can be set up to control scenarios or work in associations with other Z-Wave products.


Heatit Z-Push Button 2 can control 1association group with up to 5 products or 4 scenarios through your gateway. Heatit Z-Push Button 2 may not be used as a stand-alone
unit; it must be included in a gateway to function. The switch fits into standard Elko, Schneider Exxact and Gira System 55 frames. The switch is easy to installed, and may be fastened with
screws or double-sided tape.
SKU: 4512580 ,   Qty: Tellimisel
54,00 €