5430555

SKU: 5430555
Brand:
Unit: pcs
Qty: Tellimisel
Price:
139,00 €

Parameters


* Color

Qty.: - +
   - or -   
HEATIT Z-TRM2
Heatit Z-TRM2 is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc.
HEATIT  Z-TRM2
Heatit Z-TRM2 is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro,  Futurehome , Smarthings, Homeseer, Vera, Zipato etc.
 
Heatit Z-TRM2 is equipped with a single pole switch and it fits most System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher  loads  the thermostat must control a  contactor . The thermostat may be connected to two wired external sensors.
 
The thermostat has the capacity of up to 8 associations (relays, wall plugs etc.).
 
The thermostat is designed for electrical heating.
FEATURES
  • Floor sensor
  • Built-in room sensor
  • External room sensor
  • Temperature limiter
  • Weekly program/setback via gateway or pilot wire
  • Multilevel sensor command class
  • Firmware updates (OTA)
  • Power metering
  • LED-diode
  • Can be used in connection with different NTC-sensors
  • Lock mode/child lock
  • Calibration
  • 8 associations
  • Supports encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class
TECHNICAL DATA
Protocol Z-Wave 
SDK 6.71.00
Rated voltage 230V 50/60Hz
Max load 2900W (resistive load)
750W self-limiting heating cable
Max current 13A
Power consumption <2,0W
Min/max installation temp -20°C – 40°C
Min/max operating temp 5°C – 40°C
Temperature intervals Floor sensor 5°C – 40°C
External room sensor 5°C – 40°C
Hysteresis 0,3°C – 3,0°C (default 0,5°C)
Switch Single-pole switch
Included in package Floor sensor, Art. no. 54 301 07
Compatible with NTC
sensors with values
 10, 12, 15, 22, 33 and 47 kΩ @ 25°C
IP Class IP 21
Approvals Z-Wave Plus, CE, EN 60730-1, EN 60730-2-9, EMC 2014/30/EU, RoHS 2011/65/EU, LVD 2014/35/EU
Terminal Use 1,5mm² or 2,5mm² according to load.
 
Similar products
MCOHome Water / Electrical Heating Thermostat is a Z-Wave enabled device for indoor temperature control. MH7-WH-EU is mainly applied to control wall mounted boiler, water
valve/pump etc. , while MH7-EH-EU for electrical heating system. The device is of high reliability and practicability. And can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.
SKU: MH7H-WH ,   Qty: Tellimisel
153,99 €
External room sensor, glass front NTC 10 k?
SKU: 5430108 ,   Qty: Tellimisel
25,20 €
Description: wireless temperature sensor which can be used with FIBARO Radiator Thermostat to provide best temperature regulation. One head can be paired with only one sensor, but one sensor can be paired with three heads.
SKU: FGBRS-001 ,   Qty: 4
19,99 €
he perfect temperature for any environment.

Danfoss Eco™ is the most cost-effective means of controlling home energy consumption. It is intelligent, user-friendly and can be set according to your exact needs.
SKU: 014G1001 ,   Qty: 1
69,00 €
Product information "TKB Thermostat for Floor heating"
The TKBETZ1036 is a heating thermostat with LCD screen and built-in Z-Wave technology. The thermostat is designed to fit into your flush box and control your electric heating or on/off actuator valves used in hydronic heating. The thermostat is mains powered and has an internal temperature sensor built in and an external sensor included in the scope of delivery. To use both sensors you have to connect the external sensor to the thermostat. Then the thermostat allows to switch between the 2 different sensors. The display shows the value of the chosen temperature sensor and allows adjusting the temperature of the connected heating system. The temperature can be adjusted in steps of 1° C.
SKU: TKBETZ1036 ,   Qty: Tellimisel
70,00 €