5430560

SKU: 5430560
Brand:
Unit: pcs
Qty: 2
Price:
139,00 €

Parameters


* Color

Qty.: - +
   - or -   
Heatit Z-TRM2fx is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc.

Heatit Z-TRM2fx is equipped with a single pole switch and it fits most System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat must control a contactor. The thermostat may be connected to two wired external sensors.

The thermostat has the capacity of up to 5 associations (relays, wall plugs etc.).
Heatit Z-TRM2 is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc.
 
Heatit Z-TRM2 is equipped with a single pole switch and it fits most System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat must control a contactor. The thermostat may be connected to two wired external sensors.
 
The thermostat has the capacity of up to 8 associations (relays, wall plugs etc.).
 
The thermostat is designed for electrical heating and to be used with floor sensor or external room sensor.
FEATURES
  • Floor sensor
  • External room sensor
  • Temperature limiter
  • Weekly program/setback via gateway or pilot wire
  • Multilevel sensor command class
  • Firmware updates (OTA)
  • Power metering
  • LED-diode
  • Can be used in connection with different NTC-sensors
  • Lock mode/child lock
  • Calibration
  • 8 associations
  • Supports encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class
TECHNICAL DATA
Protocol Z-Wave 
SDK 6.71.00
Rated voltage 230V 50/60Hz
Max load 2900W (resistive load)
750W self-limiting heating cable
Max current 13A
Power consumption <2,0W
Min/max installation temp -20°C – 40°C
Min/max operating temp 5°C – 40°C
Temperature intervals Floor sensor 5°C – 40°C
External room sensor 5°C – 40°C
Hysteresis 0,3°C – 3,0°C (default 0,5°C)
Switch Single-pole switch
Included in package Floor sensor, Art. no. 54 301 07
Compatible with NTC
sensors with values
 10, 12, 15, 22, 33 and 47 kΩ @ 25°C
IP Class IP 21
Approvals Z-Wave Plus, CE, EN 60730-1, EN 60730-2-9, EMC 2014/30/EU, RoHS 2011/65/EU, LVD 2014/35/EU
Terminal Use 1,5mm² or 2,5mm² according to load.
Similar products
Smart, Versatile and Easy-to-Use Heating Control Technology

Temperature and humidity sensing
Smart Gateway for remote heating control
Wi-Fi connectivity
Touch-screen
Presence sensor
Ambience Sensor
Geo-location
Portable and compatible
App for iOS and Android
SKU: MOMITSTBV1 ,   Qty: Tellimisel
112,20 € (50%)
224,40 €

The Heatit Z-Wave is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home,

SKU: HEATIT_WHITE ,   Qty: 7
152,52 €
HEATIT Z-TRM2
Heatit Z-TRM2 is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc.
SKU: 5430555 ,   Qty: 6
139,00 €
The MCOEMH8-FC4 thermostat is a device for room temperature control, equipped with Z-Wave wireless technology. It is destined for central control of a 4-pipe fan coil, which influences room climate by heating, cooling, humidify and dehumidify. The device can read room temperature and local time, and automatically control fan speed based on the temperature difference.

The wall thermostat MCOEMH8-FC4 requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.

With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc,
SKU: MCOEMH8-FC4 ,   Qty: Tellimisel
149,99 €
All your controls in one app
Install Blastbot in your room and control all your electronic devices at anywhere using your smartphone.
SKU: BCD01 ,   Qty: 4
89,90 €