Aeotec Heavy Duty Switch 40A

SKU: AEO_HDS
Brand:
Unit: pcs
Qty: 1
Price:
128,95 €
Qty.: - +
   - or -   
The Aeon Labs Heavy Duty Switch is used for wireless control, automate and record the power consumption of heavy loads up to 40 amps. The Device can be controlled by other Z-Wave devices and can switch his heavy loads. He also works as a repeater and can forward, if the respective device are in range, signals to other Devices.
  • Heavy duty switch for loads up to 40 A
  • Energy metering function
  • Wireless Technology: Z-Wave 
  • Dimensions: 117x150x40 mm
Similar products
VIS_ZM1602
SKU: VIS_ZM1602 ,   Qty: 1
69,99 €
ZIPERGBW2
Product information "Zipato RGBW Bulb 2"
The Zipato Bulb 2 brings color into your life. Farbe ins Spiel. The LED bulb fits into every E27 bulb holder and can be connects to a smart home center through Z-Wave wireless technology right after screwing in. The required radio chip is already integrated into the bulb’s housing. Via remote control, smartphone or tablet you can vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes or use scenes (e.g. in case of an alarm) activating appropriate light color.

The Bulb 2 has in-build separate warm white, cold white and color LEDs. Therewith, you can create an atmosphere according to you wishes – with colored and white light as well. The smart lamp replaces a conventional 60 W bulb, but need significantly less energy.

Compared to its previous version, the Bulb 2 has a more rounded and smaller form.
SKU: ZIPERGBW2 ,   Qty: Tellimisel
59,99 €
SW-ZCS-1-WH
SWIID SwiidInter Z-Wave ripplülitiga, valge
SKU: SW-ZCS-1-WH ,   Qty: 1
64,90 €
Danfoss Bluetooth Thermostat
he perfect temperature for any environment.

Danfoss Eco™ is the most cost-effective means of controlling home energy consumption. It is intelligent, user-friendly and can be set according to your exact needs.
SKU: 014G10012 ,   Qty: 1
69,00 €
POPE005206
Product information "POPP Z-Weather"
The Z-Weather is an energy-self-sufficient wind and weather sensor, powered by a solar cell. Thanks to the energy management and the internal capacitor the wind sensor sends measured data to the Z-Wave Controller even during the night. The built-in energy manager automatically calculates and sets the wake-up interval between 5 minutes (on sunny days) and 1-2 hours on cloudy days or at the beginning of the day. Additionally, the energy management protects against full discharging and enables continuous operation for reporting gusting wind, storm or dusk in case of emergency and triggers appropriate actions.

The multifunctional sensor can capture and send different values via Z-Wave to the smart home center:

Wind Speed
Air Temperature
Relative Humidity
Light Intensity
Air Pressure
Dew Point
In addition, Z-Weather captures the energy delivered by the solar cell and calculates the possible energy yield of a photovoltaics system at the same place. The measurement of the solar cell’s yield is normalized to a solar module of 1 square meter and reported with 16% efficiency in kWh. To calculate the wind yield, every eighth rotation is counted and the total sum is reported as Pulse.

Thanks to Z-Weather you can trigger closing of the awning and blinds either by direct associated devices or scenes. Measures of the ambient light and the solar yield can be used to turn on the outdoor light at dusk time and turn the light off in the morning.
SKU: POPE005206 ,   Qty: Tellimisel
199,99 €