Aeotec Smart Switch 6

SKU: AEO_ZW096
Brand:
Unit: pcs
Qty: 1
Price: 73,50 €
62,48 €
Qty.: - +
   - or -   
Aeotec by Aeon Labs Smart Switch.
Model number: ZW096. 
Max standby power: 0.5W. 
USB output: DC 5V±5%, 1000mA. 
Operating temperature: -10 to 45 . 
Relative humidity: 8% to 80%. 
Operating distance: Up to 100 feet/30 metres indoors or 300 feet/100 metres outdoors.

Aeotec Smart Switch is a low-cost Z-Wave Switch plugin module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, nonvolatile memory retains all programmed information relating to the unit’s operating status. Its surface has a Smart RGB LED, which can be used for indicating the output load status or strength of the wireless signal. You can configure its indication colour according to your favour. The Smart Switch 6 is also a security Z-wave device and supports Over The Air (OTA) feature for the products firmware upgrade.
 
Similar products
NQ-92021
SKU: NQ-92021 ,   Qty: 1
115,28 €
ST812 – FLOOD DETECTOR
Protect your property from water damage! The flood detector is designed to sense the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods. The flood detector is designed so that the transceiver is mounted on the wall and its probe is placed in a location where leakage or flooding is probable. Its great compatibility with the Z-Wave product family makes it suitable for smart home cloud based platforms.

Features:
– Flood sensor cable length: 3m
– Built-in 60dB beep tone
– Battery: 3 x 1.5V Alkaline / AA
– Freq: 868.42 MHz / 869 MHz / 908.42 MHz
SKU: EVR_ST812 ,   Qty: Tellimisel
24,00 € (43%)
42,00 €
Danfoss room sensor
The Danfoss temperature sensor is used for central temperature detection and heating/cooling system control, also with multiple thermostats. The measured temperature is displayed. Two front buttons allow to overwrite the target temperature. The overwrite can be terminated for certain hours. After this time the setpoint temperature will go back to the redefined value. The device can be used as Z-Wave stand alone temperature sensor, too.
SKU: 014G0160 ,   Qty: Tellimisel
106,28 €
Sengled Everbright LED + integrated emergency light
Sengled Everbright LED + integrated emergency light

• Battery activates the LED in the event of power outage
• Emergency lighting for up to 3.5 hours
• Your LED light, should the power be o for any reason
SKU: EB-A66EUE27-3398 ,   Qty: 6
19,90 €
Sengled Flex HORN bulb holder for FLEX
SINGLE BULB HOLDER FOR FLEX
• Innovative complement to the elegant Sengled Flex design language
• Brushed aluminium in the noble variants silver or champagne
• Single or double luminaires for individual interior design
SKU: C02-BR30EAE27-3369 ,   Qty: 3
49,90 €