Danfoss room sensor

SKU: 014G0160
Brand:
Unit: pcs
Qty: Tellimisel
Price:
106,28 €
The Danfoss temperature sensor is used for central temperature detection and heating/cooling system control, also with multiple thermostats. The measured temperature is displayed. Two front buttons allow to overwrite the target temperature. The overwrite can be terminated for certain hours. After this time the setpoint temperature will go back to the redefined value. The device can be used as Z-Wave stand alone temperature sensor, too.

Beside the two front buttons the device has one more button on the top side. The use of this button can be defined by the central controller. Possible functions can include a temperature boost (heat up as soon as possible) or the activation of an energy saving mode.

Features: 

  • Temperature sensor for wall mounting
  • LCD display
  • Local control buttons
  • Additional function button (programmable via Z-Wave control center)
  • Wireless Technology: Z-Wave
  • Dimensions: 76x76x23 mm
Similar products
SKU: REM_ZXT120 ,   Qty: Tellimisel
82,28 €

The Heatit Z-Wave is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home,

SKU: HEATIT_BLA ,   Qty: Tellimisel
139,00 €
The LC-13 by Danfoss is a Z-Wave controlled electronic radiator thermostat. It is applied to be mounted on wall heating valves and controls them by a motor. The device accepts a set point that is either set manually using local buttons on the device or wirelessly using Z-Wave. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection. A small LCD display on the device shows the target temperature on request.

The device owns further intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.

The Danfoss LC-13 thermostat can be mounted with few movements to valves with standard M30x1.5 connector or RA2000 (Danfoss snap in). The device expects a regular radio connection to the IP gateway for status message exchange.
SKU: 014G0013 ,   Qty: 3
64,80 €
Heatit Extra floor sensor for Z-Water or Heatit thermostat.
SKU: 5430107 ,   Qty: Tellimisel
9,00 €
Product information "MCO Home - External Sensor for MCOEMH7H-EH2"
The external Sensor for the electrical floor heating thermostats from MCO needs to be directly connected to the thermostat. The sensor is only used for overheating protection purpose.

For the overheating protection the sensor is located near the floor to overwatch the temperature of the floor. The temperature data of the external sensor will not be shown on the display nor transmitted over Z-Wave. The valuesof the external sensor are only used for internal process of the overheat protection function.
SKU: MCO_900090 ,   Qty: 1
6,99 €