FAK_ZWS230

SKU: FAK_ZWS230
Brand:
Qty: Tellimisel
Price:
297,50 €
Qty.: - +
   - or -   
Product information "FAKRO Chain Drive for Pivot Windows (230V)"
The ZWS230 of FAKRO chain motor is thanks to its small dimensions and suitable force output ideal for roof window operating and is fully compatible with the Z-Wave wireless system which allows integration into a home automation system. The motor can be used to upgrade centre pivot and top hung and pivot roof windows of different manufacturers.

The maximum chain reach of the ZW230 is 36cm, the max chain force is 200N. The motor is equipped with built-in overload protection, which acts as a sensor for correct window closing.

Features:

  • Chain drive for centre pivot and top hung and pivot roof windows
  • Voltage: 230 V
  • Max. chain reach: 36 cm
  • Max chain force: 200 N
  • Opening and closing via remote control or automations
  • Dimensions: 34 x 47 x 360 mm
  • Wireless technology: Z-Wave
Similar products
Temeprature sensor
The DS18B20 temperature sensor may be installed anywhere where temperature readouts are necessary. If adequately protected, the DS18B20 sensor may be installed in humid conditions, under water, sealed in concrete or placed under the floor.
SKU: DS18B20 ,   Qty: 28
3,60 €
Aeotec USB Z-stick Z-Wave PLUS
That’s your simple entry into the world of smart home: Plug the Z-Stick by Aeotec (Aeon Labs) into your PC, Notebook, Barebone, Raspberry Pi etc. and turn it into a Z-Wave smart home control center.

The control of the Z-Wave network is realized via ‘Z-Wave Serial AP’ (according to ‘Z-Wave Application Programmers Guide, INS10247’). It’s also used by well-known Z-Wave control programs such as IP Symcon, Homeseer etc. This allows you to use the Aeotec Z-Stick universal with other Z-Wave software solutions.
SKU: AEO_ZW090-C ,   Qty: 1
67,00 €
TKBETZ1036
Product information "TKB Thermostat for Floor heating"
The TKBETZ1036 is a heating thermostat with LCD screen and built-in Z-Wave technology. The thermostat is designed to fit into your flush box and control your electric heating or on/off actuator valves used in hydronic heating. The thermostat is mains powered and has an internal temperature sensor built in and an external sensor included in the scope of delivery. To use both sensors you have to connect the external sensor to the thermostat. Then the thermostat allows to switch between the 2 different sensors. The display shows the value of the chosen temperature sensor and allows adjusting the temperature of the connected heating system. The temperature can be adjusted in steps of 1° C.
SKU: TKBETZ1036 ,   Qty: Tellimisel
70,00 €
PHIEPAD02
Product information "Philio Dimmer socket"
Transform any home into a smart home with the Philio PAD02 Z-Wave Smart Dimmer Socket. The dimmer socket can be easily adapted to your current lighting devices, uses your existing lamp (E27 socket), and provides Z-Wave wireless and with remote control of overhead lighting. Use the dimmer feature to customize the lighting output and create the perfect ambiance for any room. Providing ultimate flexibility, the Philio Z-Wave Smart Dimmer Socket allows you to operate the lighting by itself or easily integrate the socket with two-way, three-way or four-way wiring configurations by adding the Philio Smart Switch Modules for Z-Wave. Take control of your home lighting with Philio Z-Wave Smart Lighting Controls!

Easily adapt to any standard lamp E27 socket with the Philio Z-Wave Smart Dimmer Socket to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or used to create dimmable ambient interior lighting scenes.
SKU: PHIEPAD02 ,   Qty: Tellimisel
44,99 €
POPE005206
Product information "POPP Z-Weather"
The Z-Weather is an energy-self-sufficient wind and weather sensor, powered by a solar cell. Thanks to the energy management and the internal capacitor the wind sensor sends measured data to the Z-Wave Controller even during the night. The built-in energy manager automatically calculates and sets the wake-up interval between 5 minutes (on sunny days) and 1-2 hours on cloudy days or at the beginning of the day. Additionally, the energy management protects against full discharging and enables continuous operation for reporting gusting wind, storm or dusk in case of emergency and triggers appropriate actions.

The multifunctional sensor can capture and send different values via Z-Wave to the smart home center:

Wind Speed
Air Temperature
Relative Humidity
Light Intensity
Air Pressure
Dew Point
In addition, Z-Weather captures the energy delivered by the solar cell and calculates the possible energy yield of a photovoltaics system at the same place. The measurement of the solar cell’s yield is normalized to a solar module of 1 square meter and reported with 16% efficiency in kWh. To calculate the wind yield, every eighth rotation is counted and the total sum is reported as Pulse.

Thanks to Z-Weather you can trigger closing of the awning and blinds either by direct associated devices or scenes. Measures of the ambient light and the solar yield can be used to turn on the outdoor light at dusk time and turn the light off in the morning.
SKU: POPE005206 ,   Qty: Tellimisel
199,99 €