FGBHT-001+FGBRS-001

SKU: FGBHT-001+FGBRS-001
Brand:
Unit: set
Qty: 11
Price:
94,99 €
Qty.: - +
   - or -   
Description: FIBARO The Heat Controller is a remotely controlled
thermostatic head to control temperature in your room. It can be
mounted without tools on three types of thermostatic radiator valves.
Set of two devices: FGBHT-001 + FGBRS-001
Technical Data:
• Power supply: 3.7V Li-Poly battery pack (non-replaceable)
• Charging port: micro-USB
• Charger voltage (not included): 5V DC (±5%)
• Minimum charger current (not included): 0.5A
• Operating temperature: 0–40°C
• Storage temperature (standby mode): -10–25°C
• Maximum water temperature: 90°C
• Temperature measuring accuracy: 0.5°C (within 0–40°C range)
• Dimensions (Diameter x Height): 56 x 74 mm (without the adapter), 56 x 87 mm (with the adapter)
• EU Directive compliance: RoHS 2011/65/EU; RED 2014/53/EU
• Radio protocol: Bluetooth® low energy (4.2)
• Radio frequency band: 2.4 GHz ISM band
• Maximum transmit power: EIRP up to 6dBm
Similar products
Fibaro Relay Switch
Product Overview:
Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch
boxes, or anywhere else where it is necessary to operate an electric device up to 10A. Fibaro
On/Off Relay Switch can switch on or off connected device either through radio waves or
through the wall switch connected directly to it.
SKU: FGS-212 ,   Qty: 43
69,00 €
Aeotec Smart Switch 6
Aeotec by Aeon Labs Smart Switch.
SKU: AEO_ZW096 ,   Qty: 1
62,48 € (15%)
73,50 €
Danfoss Living Connect Thermostat
The LC-13 by Danfoss is a Z-Wave controlled electronic radiator thermostat. It is applied to be mounted on wall heating valves and controls them by a motor. The device accepts a set point that is either set manually using local buttons on the device or wirelessly using Z-Wave. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection. A small LCD display on the device shows the target temperature on request.

The device owns further intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.

The Danfoss LC-13 thermostat can be mounted with few movements to valves with standard M30x1.5 connector or RA2000 (Danfoss snap in). The device expects a regular radio connection to the IP gateway for status message exchange.
SKU: 014G0013 ,   Qty: Tellimisel ,   Delivery time: 5-7 päeva
64,80 €
Fibaro Apple Homekit Relay
FIBARO Single Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Single Switch allows to control connected devices either via HomeKit technology (using Bluetooth® low energy) or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
SKU: FGBHS-213 ,   Qty: 14
59,99 €
Heatit Z-Water 10 relay output module
The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off c
SKU: 4512475 ,   Qty: Tellimisel
249,90 €