Fibaro Bypass 2
Fibaro Bypass 2 is a device complementary to Fibaro Dimmer 2. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0.5 Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.
FIBARO Bypass 2 (FGB-002) is a device designed to work with FIBARO Dimmer 2 (FGD-212), to be used with LED bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2 prevents LEDs from flickering and turned off compact fluorescent lamps from glowing. In 2-wire connection, FIBARO Bypass 2 reduces the minimum power of load required by the Dimmer for correct operation. FGB-002 provides powering of the Dimmer 2 in case of controlling low loads.
• Power source: 100-240V~ 50/60Hz,
• Operating temperature: 0-35oC,
• Power consumption: < 1.4W,
• To be mounted in standard wall switch boxes Ø ≥ 50 mm,
• Outside dimensions (L x W x H) - 31mm x 21.6mm x 13mm.
Read the manual before attempting to install the device!
FIBARO Bypass 2 is compliant with the following EU directives:
RoHS 2011/65/EU, LVD 2014/35/EU, EMC 2014/30/EU
Power supply: 100-240 V~ 50/60 Hz
Operating temperature: 0-35°C
Dimensions: 31 x 21,6 x 13 mm
Power consumption: < 1,4 W
The Qubino Flush Dimmer 0-10V is a universal dimmer with a standard 0-10V output and a multi-function input, which may be a push button or switch, a potentiometer or a 0-10V signal. It also measures power consumption and supports the connection of a digital temperature sensor.
May be connected to two-wire or three-wire configuration. Fibaro Dimmer 2 can switch or dim
connected light source either through radio waves or through the wall switch connected
directly to it. New Fibaro Dimmer 2 is equipped with an algorithm of smart light source
detection which makes configuration easier and ensures high compatibility of the device. It
features automatic overload protection switch-off and soft start function. In case of
non-dimmable light sources only on/off function may be possible (in 3-wire connection).
Transform any home into a smart home with the Philio PAD02 Z-Wave Smart Dimmer Socket. The dimmer socket can be easily adapted to your current lighting devices, uses your existing lamp (E27 socket), and provides Z-Wave wireless and with remote control of overhead lighting. Use the dimmer feature to customize the lighting output and create the perfect ambiance for any room. Providing ultimate flexibility, the Philio Z-Wave Smart Dimmer Socket allows you to operate the lighting by itself or easily integrate the socket with two-way, three-way or four-way wiring configurations by adding the Philio Smart Switch Modules for Z-Wave. Take control of your home lighting with Philio Z-Wave Smart Lighting Controls!
Easily adapt to any standard lamp E27 socket with the Philio Z-Wave Smart Dimmer Socket to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or used to create dimmable ambient interior lighting scenes.