Fibaro Dimmer 2

Unit: pcs
Qty: 53
59,99 €
Qty.: - +
   - or -   
Radio controlled light dimming module, designed to work with various types of light sources.
May be connected to two-wire or three-wire configuration. Fibaro Dimmer 2 can switch or dim
connected light source either through radio waves or through the wall switch connected
directly to it. New Fibaro Dimmer 2 is equipped with an algorithm of smart light source
detection which makes configuration easier and ensures high compatibility of the device. It
features automatic overload protection switch-off and soft start function. In case of
non-dimmable light sources only on/off function may be possible (in 3-wire connection).

Product Highlights:
As a dimmer, works with:
• 230V operated conventional incandescent and halogen light sources
• 12V operated ELV halogen lamps (with electronic transformers)
• 12V operated MLV halogen lamps (with ferromagnetic transformers)
• Dimmable LED lamps
• Dimmable compact fluorescent CFL tube lamps
• Supported dimmable light sources (power factor > 0.5) with minimal power of 5VA using
FIBARO Bypass 2 (depending on the type of load)
As a switch, works with:
• Compact fluorescent lamps
• LED lamps
• Supported light sources (power factor > 0.5) with minimal power of 5VA using
FIBARO Bypass 2 (depending on the type of load)

Technical Data:
• Power source 220-240V~ 50Hz
• Output power: 50-250W (resistive load)
• Overcurrent protection: required external 10A circuit breaker
• Power consumption: <1.3W
• Ambient temperature: 0oC - 35oC
• To be mounted in standard wall switch boxes Ø ≥ 50mm
• Radio protocol: Z-Wave Plus
• Radio frequency: 868.42 MHz or 869.85 MHz EU; 908.4 MHz or 916 MHz US;
921.4 MHz or 919.8 MHz ANZ; 869 MHz RU;
• Outside dimensions (L x W x H): 42.5 x 38.25 x 20.3mm
• Compliant with EU directives: RoHS 2011/65/EU, LVD 2006/95/EC, EMC 2004/108/EC,
R&TTE 1999/5/EC

Product features:
• Compatible with any Z-Wave and Z-Wave+ controller
• Implemented algorithm of smart light source detection
• Active power and energy metering functionality
• Works with various types of switches – momentary, toggle, three-way, etc.
• Soft-start function
• LED diode signaling inclusion status, calibration status and MENU levels
• Built-in Z-Wave range tester
• Dimmer 2 automatically senses faults in wiring, reporting excess temperature,
burnt bulb, overvoltage and overload
• Advanced configuration options


Similar products
Flush Dimmer 0-10V is a unique Z-Wave Plus product and truly one of a kind. It was researched and developed based on the end users and DIY (Do It Yourself) enthusiasts who were desperately looking for a Z-Wave solution with 0-10V input/output.

The Qubino Flush Dimmer 0-10V is a universal dimmer with a standard 0-10V output and a multi-function input, which may be a push button or switch, a potentiometer or a 0-10V signal. It also measures power consumption and supports the connection of a digital temperature sensor.
SKU: ZMNHVD1 ,   Qty: 2
69,00 €
SKU: ZMNHDA2 ,   Qty: Tellimisel
69,00 €
With the AEOTEC Nano Dimmer switchable and dimmable electric installations such as lighting or ceiling fans can be integrated into a Z-Wave network. Thus, the connected load can be switched and dimmed both wirelessly via Z-Wave and locally via existing wall switch. The AEOTEC Nano Dimmer adjusts oneself to the connected lighting automatically and is therewith useable with various lighting kind of lighting (LED, Dimmable LED, CFL, Fluorescent, Incandescent, Halogen). Combined with an appropriate Bypass, it can even dim low power LEDs and CFLs that use less than 20 watts.
SKU: Zw111-c ,   Qty: Tellimisel
64,50 €
The Qubino Flush RGBW Dimmer is designed to control your RGB/RGBW strips and LED strips or bulbs.
69,90 €
Product information "Philio Dimmer socket"
Transform any home into a smart home with the Philio PAD02 Z-Wave Smart Dimmer Socket. The dimmer socket can be easily adapted to your current lighting devices, uses your existing lamp (E27 socket), and provides Z-Wave wireless and with remote control of overhead lighting. Use the dimmer feature to customize the lighting output and create the perfect ambiance for any room. Providing ultimate flexibility, the Philio Z-Wave Smart Dimmer Socket allows you to operate the lighting by itself or easily integrate the socket with two-way, three-way or four-way wiring configurations by adding the Philio Smart Switch Modules for Z-Wave. Take control of your home lighting with Philio Z-Wave Smart Lighting Controls!

Easily adapt to any standard lamp E27 socket with the Philio Z-Wave Smart Dimmer Socket to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or used to create dimmable ambient interior lighting scenes.
SKU: PHIEPAD02 ,   Qty: Tellimisel
44,99 €