Fibaro Roller shutter 2
FIBARO Roller Shutter 2 is a module designed to control roller blinds, awnings, venetian blinds, gates and other single phases, AC powered devices. FIBARO Roller Shutter 2 allows precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring.
As with all other Actors, FIBARO Roller Shutter 2 allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
Main feat Product Highlights:
• Power metering function,
• Built-in Z-Wave network range tester,
• Unique, garage gate controller mode,
• Ultra-precise roller blind and venetian blind positioning
FIBARO Roller Shutter 2 is compliant with following EU directives:
• RED 2014/53/EU • RoHS 2011/65/EU
Read the manual before attempting to install the device!
Power supply: 110-240V AC, 50/60Hz
Rated load current: 4.2A - lamps and resistive loads, 1.7A - inductive loads
Supported motor type: single-phase AC motors
Operating temperature: 0 to 35°C
Dimensions (L x W x H): 42.5 x 38.25 x 20.3 mm
Set contains: Home Center Lite, Flood Sensor, Motion Sensor, Smoke Sensor 2, Door Window Sensor FGK-101, Wall Plug F (Schuko).
Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wall
switch boxes, or anywhere else where it is necessary to operate two independent devices of
combine current up to 10A. Fibaro Double On/Off Relay Switch can switch on or off connected
devices either through radio waves or through the wall switch connected directly to it.