Fibaro Single Relay 2
FIBARO Switch 2 is designed to be installed in wall switch boxes or anywhere else where it is necessary to control electric devices. The Switch 2 allows controlling connected devices either via the Z-Wave network or via a switch connected directly to it. Active power and energy consumption allows to monitor and reduce electricity bills. The Switch 2 is compatible with any Z-Wave or Z-Wave+ Controller.
FIBARO Switch 2 is compliant with following EU directives: • RED 2014/53/EU • RoHS 2011/65/EU
• Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and ener
Power supply: 100-240V AC, 50/60Hz
Operating temperature: 0-35°C
Dimensions (L x W x H): 42.5 x 38.25 x 20.3 mm
FGS-213 - Resistive load - IEC standards 8A; UL standards 6,5A
FGS-213 - Tungsten load - IEC standards 8A; UL standards 5A
• Wireless music playback
• Connect up to 8 loudspeakers
• Control brightness, volume and sound via the free app
The device owns further intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.
The Danfoss LC-13 thermostat can be mounted with few movements to valves with standard M30x1.5 connector or RA2000 (Danfoss snap in). The device expects a regular radio connection to the IP gateway for status message exchange.
Wireless and combinable Stereo Loudspeaker;
High-Quality JBL Stereo sound manageable via App;
Plain downlight, fitting to all interiors and easy installation.