The Heatit Z-Wave is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home,
The Danfoss temperature sensor is used for central temperature detection and heating/cooling system control, also with multiple thermostats. The measured temperature is displayed. Two front buttons allow to overwrite the target temperature. The overwrite can be terminated for certain hours. After this time the setpoint temperature will go back to the redefined value. The device can be used as Z-Wave stand alone temperature sensor, too.
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device.The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if the device is within the Z-Wave network. The Motion Sensor can be used for lighting scenes and security monitoring systems.
The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off c
Heatit Z-TRM2 is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc.