Heatit Z-Water 10 relay output module

SKU: 4512475
Brand:
Unit: set
Qty: 10
Price:
249,90 €
Qty.: - +
   - or -   
The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off c

VÕIMALUSED

  • Releeväljundeid võib kasutada erinevate seadmete juhtimiseks. Näiteks põrandakütteajamid.
  • Võimalik kasutada nii 230V kui 24V põrandakütteajameid.
  • Sisendisse võimalik ühendada 4 analoogtemperatuuriandurit 10Kohm
  • Võimalik kasutada koos Heatit Z-Temp termostaadiga, et luua erinevaid autonoomseid küttetsoone.
  • DIN liistu kinnitus
  • Töötab ka Z-Wave pikendajana.
  • Tarkvarauuendamine üle õhu (OTA)
  • Erinevad tarkvaraversioonid (analoog/digitaal sisendid)
  • Toetab krüpteeringut: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class
 TEHNILISED ANDMED:

Protokoll: Z-Wave PLUS 
SDK 6.71.00
Tööpinge 100V – 240V 50/60Hz
Voolutarve 0.6W standby
Sisseehitatud kaitse 3.15A Quick-Acting, UMF 250 Schurter Inc., part no.: 3405.0171.11
24V DC väljund Max 1.17A, 28W
Releeväljundid Maksimaalne koormus: 5A
Maks. lülituspinge: 250V AC, 30V DC
Maks. lülitusvõimsus: 5A
Maks. koormustaluvus 1,250 VA, 150W

Sisendid
Maks. sisendpinge: 10V DC

Temperatuuriandurid: 10 KΩ
Sisendpinge: 5V DC
Z-Wave Plus Jah
Vastab nõuetele: CE, EN 50491-3: 2009, EN 60669-2: 2004, EMC 2014/30/EU, RoHS 2011/65/EU, LVD 2014/35/EU

Similar products

The Heatit Z-Wave is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home,

SKU: HEATIT_WHITE ,   Qty: Tellimisel
139,00 €

The Heatit Z-Wave is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home,

SKU: HEATIT_BLA ,   Qty: Tellimisel
139,00 €
The LC-13 by Danfoss is a Z-Wave controlled electronic radiator thermostat. It is applied to be mounted on wall heating valves and controls them by a motor. The device accepts a set point that is either set manually using local buttons on the device or wirelessly using Z-Wave. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection. A small LCD display on the device shows the target temperature on request.

The device owns further intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.

The Danfoss LC-13 thermostat can be mounted with few movements to valves with standard M30x1.5 connector or RA2000 (Danfoss snap in). The device expects a regular radio connection to the IP gateway for status message exchange.
SKU: 014G0013 ,   Qty: 5
64,80 €
FIBARO The Heat Controller (Z-Wave) is a remotely controlled thermostatic head to control temperature in your room. It measures the temperature and automatically adjusts the heat level. It can be mounted without tools on three types of thermostatic radiator valves. With additional FIBARO Temperature Sensor it is even more precise in adjusting the right temperature in your home. Temperature sensor can be placed anywhere in the room and the device will use it as a reference point for the room temperature. These devices together are a perfect match and let you create schedules via app to easily manage temperature throughout the week. Set of two devices: The Heat Controller FGT-001, Temperature Sensor FGBRS-001.
SKU: RTSP ,   Qty: 13
89,99 €
Product information "MCO Home - External Sensor for MCOEMH7H-EH2"
The external Sensor for the electrical floor heating thermostats from MCO needs to be directly connected to the thermostat. The sensor is only used for overheating protection purpose.

For the overheating protection the sensor is located near the floor to overwatch the temperature of the floor. The temperature data of the external sensor will not be shown on the display nor transmitted over Z-Wave. The valuesof the external sensor are only used for internal process of the overheat protection function.
SKU: MCO_900090 ,   Qty: 1
6,99 €