MCOHOME Fancoil thermostat

SKU: MCOEMH8-FC4
Brand:
Unit: pcs
Qty: Tellimisel
Price:
149,99 €

Parameters


* Color

Qty.: - +
   - or -   
The MCOEMH8-FC4 thermostat is a device for room temperature control, equipped with Z-Wave wireless technology. It is destined for central control of a 4-pipe fan coil, which influences room climate by heating, cooling, humidify and dehumidify. The device can read room temperature and local time, and automatically control fan speed based on the temperature difference.

The wall thermostat MCOEMH8-FC4 requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.

With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc,

Features:

  • Central control of 4-pipe fan coil
  • Tempered glass panel (white) with capacitive buttons
  • Clear display with basic control information
  • Cooling, Heating and Ventilation modes
  • Intelligent on/off control of 3-speed fan, and electric valve
  • Flush mounted in 86x86mm junction box
  • Wireless technologie: Z-Wave Plus

Specification

  • Power Supply: AC85V~260V, 50/60HZ
  • Resistive Load: 3A
  • Self Consumption? less than 1W
  • Temperature Sensor: NTC 15K
  • Display Accuracy: 0.1°C
  • Working Environment: 0 ~ 55°C; (less than 95% RH Non-condensation)
  • Temperature Setting: 5 ~ 35°C (Adjustable)
  • Dimension: 86* 86*42mm
  • Hole Pitch: 60-65mm (86 Standard junction box)
  • Z-Wave Frequency: 868.42MHz (EU)
Similar products

The Heatit Z-Wave is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home,

SKU: HEATIT_WHITE ,   Qty: 3
139,00 €

The Heatit Z-Wave is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home,

SKU: HEATIT_BLA ,   Qty: 1
139,00 €
The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off c
SKU: 4512475 ,   Qty: Tellimisel
249,90 €
Heatit Extra floor sensor for Z-Water or Heatit thermostat.
SKU: 5430109 ,   Qty: 6
9,00 €
Heatit Z-TRM2fx is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc.

Heatit Z-TRM2fx is equipped with a single pole switch and it fits most System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat must control a contactor. The thermostat may be connected to two wired external sensors.

The thermostat has the capacity of up to 5 associations (relays, wall plugs etc.).
SKU: 5430560 ,   Qty: 9
139,00 €