Smart Home Kit - Raspberry 1 B+ & Z-Wave Razberry 2 (EU)

SKU: ZWUERASPRAZ2
Brand: Muu
Unit: set
Qty: Tellimisel
Price:
79,99 €
Qty.: - +
   - or -   
Raspberry Pi B+ koos Razberry 2.0 Z-Wave laienduskaardiga. Väga hea komplekt isetegijale.

Raspberry Pi B+ - Features:

  • Chip Broadcom BCM2835 SoC
  • Core architecture ARM11
  • CPU 700 MHz Low Power ARM1176JZFS Applications Processor
  • GPU Dual Core VideoCore IV® Multimedia Co-Processor
  • Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
  • Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering
  • and DMA infrastructure
  • Memory 512MB SDRAM
  • Operating System Boots from Micro SD card, running a version of the Linux operating
  • system
  • Dimensions 85 x 56 x 17mm
  • Power Micro USB socket 5V, 2A (power adapter not included)
  • Ethernet 10/100 BaseT Ethernet socket
  • Video Output HDMI (rev 1.3 & 1.4)
  • Composite RCA (PAL and NTSC)
  • Audio Output 3.5mm jack, HDMI
  • USB 4 x USB 2.0 Connector
  • GPIO Connector 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines
  • Camera Connector 15-pin MIPI Camera Serial Interface (CSI-2)
  • JTAG Not populated
  • Display Connector Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
  • Memory Card Slot Micro SDIO

For more information about the Razbery module please follow the link.

Note: This package is a softbundle and does not include an own packaging for the Kit. Both products are shipped in their original packaging.

Similar products
Pulti on võimalik kasutada:
Z-Wave seadmete sisse/välja lülitamiseks
Z-Wave dimmerite sisse/välja lülitamiseks ja dimmerdamiseks
Stseenide käivitamiseks, mis on keskseadmes eelnevalt seadistatud (näiteks kodu valvestamine, väravate avamine jms).
SKU: ZME_KFOB ,   Qty: Tellimisel
50,11 €
SKU: 321-IQW-A1 ,   Qty: Tellimisel
69,95 €
FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device. It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System. Different actions may be triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.
SKU: FGPB-101 ,   Qty: 11
49,99 €
Grinder will smarten up your home or office and ensure comfort, security and energy savings. It’s the ideal fit for larger residential houses or small offices.
SKU: CC-G-1 ,   Qty: Tellimisel
1399,00 €
FIBARO Home Center 2 is the hub unit of high computing power used to manage your FIBARO Home Automation System. HC2 communicates with up to 230 actors and sensors using wireless communication protocol named Z-Wave. With FIBARO Home Center 2 your FIBARO system will be powerful.
SKU: FGHC2-must ,   Qty: Tellimisel
599,00 €