The TKBETZ1036 is a heating thermostat with LCD screen and built-in Z-Wave technology. The thermostat is designed to fit into your flush box and control your electric heating or on/off actuator valves used in hydronic heating. The thermostat is mains powered and has an internal temperature sensor built in and an external sensor included in the scope of delivery. To use both sensors you have to connect the external sensor to the thermostat. Then the thermostat allows to switch between the 2 different sensors. The display shows the value of the chosen temperature sensor and allows adjusting the temperature of the connected heating system. The temperature can be adjusted in steps of 1° C.
valve/pump etc. , while MH7-EH-EU for electrical heating system. The device is of high reliability and practicability. And can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.
The Heatit Z-Wave is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home,
The wall thermostat MCOEMH8-FC4 requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.
With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc,