Heatit Z-Therm2 termostaat 13A

Tootekood: 5430555
Kaubamärk:
Ühik: tk
Laoseis: Tellimisaeg 5-7päeva
Hind:
152,52 €

Parameetrid


* Värvus Nupp

Kogus: - +
   - või -   

HEATIT Z-TRM2
Heatit Z-TRM2 is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc.

HEATIT Z-TRM2
Heatit Z-TRM2 is an electronic thermostat for electrical floor heating. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Futurehome, Smarthings, Homeseer, Vera, Zipato etc.
 
Heatit Z-TRM2 is equipped with a single pole switch and it fits most System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat must control a contactor. The thermostat may be connected to two wired external sensors.
 
The thermostat has the capacity of up to 8 associations (relays, wall plugs etc.).
 
The thermostat is designed for electrical heating.
FEATURES

  • Floor sensor
  • Built-in room sensor
  • External room sensor
  • Temperature limiter
  • Weekly program/setback via gateway or pilot wire
  • Multilevel sensor command class
  • Firmware updates (OTA)
  • Power metering
  • LED-diode
  • Can be used in connection with different NTC-sensors
  • Lock mode/child lock
  • Calibration
  • 8 associations
  • Supports encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL DATA
Protocol Z-Wave 
SDK 6.71.00
Rated voltage 230V 50/60Hz
Max load 2900W (resistive load)
750W self-limiting heating cable
Max current 13A
Power consumption <2,0W
Min/max installation temp -20°C – 40°C
Min/max operating temp 5°C – 40°C
Temperature intervals Floor sensor 5°C – 40°C
External room sensor 5°C – 40°C
Hysteresis 0,3°C – 3,0°C (default 0,5°C)
Switch Single-pole switch
Included in package Floor sensor, Art. no. 54 301 07
Compatible with NTC
sensors with values
 10, 12, 15, 22, 33 and 47 kΩ @ 25°C
IP Class IP 21
Approvals Z-Wave Plus, CE, EN 60730-1, EN 60730-2-9, EMC 2014/30/EU, RoHS 2011/65/EU, LVD 2014/35/EU
Terminal Use 1,5mm² or 2,5mm² according to load.
 

Sarnased tooted
FIBARO Uputuse andur

Uputuseanduril on mitu erinevat kasutusotsarvet:
- Uputuseandur
- Temperatuuriandur
- Kallutuseandur

Tootekood: FGFS-101 ,   Laoseis: 6
69,00 €
Aeotec nutipistik 6 Z-Wave +

Aeoteci Z-Wave nutipistik töötab erinevate Z-Wave keskustega

Tootekood: AEO_ZW096 ,   Laoseis: 1
62,48 € (15%)
73,50 €
FIBARO CO andur Z-Wave PLUS

FIBARO CO anduri näol on tegemist elupäästva seadmega, mis on ette nähtud paigaldamaks ruumidesse kus on oht CO gaasi tekkeks. Sellisteks allikateks võivad olla erinevad kütteseadmed, kaminad, ahjud, pliidid jms. Lisaks gaasiboilerid ja muud elava tulega

Tootekood: FGCD-001 ,   Laoseis: 19
109,00 €
Netatmo Home Coach Apple HomeKit

Netamo ilmajaam mis ühildub Apple HomeKit-ga

Tootekood: NHC-EU-A ,   Laoseis: Tellimisaeg 5-7päeva
99,90 €
FIBARO Apple HomeKit Nutipistik
Spetsiaalselt Apple HomeKit jaoks toodetud FIBARO Nutipistik, mis kasutab nii Bluetooth® madala energiatarbe tehnoloogiat kui ka Wi-Fi ühendust.
Tootekood: FGBWHWPEF-102 ,   Laoseis: 7
69,00 €