4512581

Артикул: 4512581
Бренд:
Кол-во: 4
Цена:
54,00 €
Кол-во: - +
   - или -   
Heatit Z-Push Button 8 is a battery operated wall switch with 8 push buttons. The switch enables you to control the Z-Wave-products in your smart home system. Managing your Z-Wave products becomes easy and practical. The switch can be set up to control scenarios or work in associations with other Z-Wave products.


Heatit Z-Push Button 8 can control up to 4 seperate association groups with up to 20 products or up to 16 scenarios through your gateway.

Heatit Z-Push Button 8 may not be used as a stand-alone unit; it must be included in a gateway to function.

The switch fits into standard Elko, Schneider Exxact and Gira System 55 frames.

The switch is easy to installed, and may be fastened with screws or double-sided tape.

FUNCTIONS

  • Battery operated wall switch
  • Fits Gira System 55, Elko RS-16 and Schneider Exxact
  • Controls 4 separate groups and up to 20 units
  • Controls up to 16 scenarios via your gateway
  • LED-diode
  • Easy to install with screws or double-sided tape
  • Supports encryption modes S0, S2 Authenticated Class,
    S2 Unauthenticated Class

TECHNICAL DATA

Protocol Z-Wave, 868,4 MHz
SDK 6.71.01
Power 1 x CR2450 battery
Buttons 8
Operating temperature 0 – 40°C
Relative humidity 8% – 80%
Range Up to 20 meters (depending on surroundings)
IP class IP 20
Size (LxWxH) 71,2 x 71,2 x 13,6 mm
Explorer Frame Support Yes
Device Type Wall controller
Generic Device Class Switch Remote
Specific Device Class Switch Remote Multilevel
Routing No
Flirs No
Approvals CE, RoHS 2011/65/EU

 
Схожие продукты
SWIID SwiidInter Z-Wave ripplülitiga, valge
Артикул: SW-ZCS-1-WH ,   Кол-во: Tellimisel
64,90 €
Product information "TKB Home Double Relay Wall Switch (Cornered Frame)"
The double relay wall switch by TKB Home is a wall switch with integrated double relays and 2 rocker buttons. The double relay can switch 2 electrical loads with 1,380 watts each. With the double shift paddle or via Z-Wave radio, you can control each load separately. Besides, further actions within the Z-Wave network can be triggered via double click.

The wall switch can be easily connected to 2 electrical loads without installing a flush mounted module separately. The 2 relays are located inside a module which is directly connected to the wall switch with the paddles. With that TKB Home wall switch you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box.

With TKB Home wall switches you can easily integrate your already installed lights into your home automation network. Without installing any news cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation.
Артикул: TKBETZ57 ,   Кол-во: Tellimisel
49,99 €
Heatit Z-Push Button 2 is a battery operated wall switch with 2 push buttons. The switch enables you to control the Z-Wave-products in your smart home system. Managing your Z-Wave products becomes easy and practical. The switch can be set up to control scenarios or work in associations with other Z-Wave products.


Heatit Z-Push Button 2 can control 1association group with up to 5 products or 4 scenarios through your gateway. Heatit Z-Push Button 2 may not be used as a stand-alone
unit; it must be included in a gateway to function. The switch fits into standard Elko, Schneider Exxact and Gira System 55 frames. The switch is easy to installed, and may be fastened with
screws or double-sided tape.
Артикул: 4512580 ,   Кол-во: 5
54,00 €
Артикул: FGWU-021 ,   Кол-во: Tellimisel
34,95 €
Артикул: FG-WDEU111-AS-8001-10 ,   Кол-во: Tellimisel
674,55 €